ADA Cosmetics Refillution
Handling Manual

Learn how to use the Refillution step-by-step with our handling manual.

Whatch the videos for every step or download the full manual in pdf.

Refillution Manual Sections

1:
Ready-to-Refill

Go to
Chapter 1

2:
Navigate the menu

Go to
Chapter 2

3:
Cleaning Program

Go to
Chapter 3

4:
Hose Exchange

Go to
Chapter 4

Chapter 1: Ready-to-Refill

1.1 Unbox the Refillution

1.2 Set-up the Refill Machine

1.3 Set up the SmartCube®

1.4 Scan the SmartCube®

1.5 Insert the SmartCube®

1.6 Vent the SmartCube®

1.7.1 Open SmartCare Dispenser

1.7.2 Open Pump Dispenser

1.7.3 Open SHAPE Dispenser

1.8.1. Scan the SmartCare Dispenser

1.8.2 Scan the Pump Dispenser

1.8.2 Scan SHAPE Dispenser

1.9.1 Refilling with the rotary wheel with SmartCare

1.9.2 Refilling with the rotary wheel with the Pump Dispenser

1.9.3 Refilling with the rotary wheel with SHAPE

1.10 Retrieve Data

Chapter 2: Navigate the menu​

2.1 Access & navigate through the menu

2.2.1 Menu Item Fast-Filling

2.2.2 Menu Item Fast-Filling - Refilling with Fast-Filling function

2.3.1 Menu Item Auto-Stop

2.3.2 Menu Item Auto-Stop - Refilling with Auto-Stop

2.4 Menu Item Show Info

2.5 Menu Item Brightness

2.6.1 Menu Item Scanner

2.6.2 Menu Item Scanner - Refilling with deactivated scanner function

2.7 Menu Item Change User Pin

2.8 Menu Item Date & Time

2.9 Menu Item DMC Reader

2.10 Menu Item: Language

Chapter 3: Cleaning Program

Cleaning Program

Chapter 4: Hose Exchange

Hose exchange

Chapter 5: FAQ

1. Which dispensers can I refill with Refillution?

Refillution is compatible with refillable SmartCare, SHAPE and mono-material pump dispensers from ADA Cosmetics. Use dispensers designed for the system and the corresponding refill product. If you are unsure, your ADA Cosmetics contact can help you identify the right combination.

2. How do I prepare a new SmartCube® for refilling?

Preparation involves four steps: prepare, scan, insert and vent the SmartCube®. Follow the sequence shown in the instructions.
Watch the videos: Preparing and inserting the SmartCube®

3. How do I open my dispenser for refilling?

The procedure varies depending on the dispenser type. Select the instructions for SmartCare, SHAPE or the pump dispenser and follow the steps shown.

Watch the videos:

4. Why do I need to scan both the SmartCube® and the dispenser?

The Data Matrix Codes register the refill product and the dispenser. This makes it possible to trace which product batch was used to refill each dispenser. Scanning supports correct product matching and refill traceability.

5. How do I control the refilling process?

When refilling with the rotary wheel, you control the product flow using the hand dial. The instructions demonstrate the procedure for your dispenser type. Separate videos explain the “Fast-Filling” and “Auto-Stop” functions.

Watch the videos:

6. What should I do if refilling does not work?

First, check that all preparation steps have been completed: Has the SmartCube® been scanned, inserted and vented? Has the corresponding dispenser also been scanned? Check for any messages on the display. If the problem persists, contact ADA Cosmetics Customer Service.

7. How do I clean the Refillution machine?

The machine has a dedicated cleaning programme. Follow the corresponding instructions. Hose replacement is explained in a separate video.

Watch the videos:

8. Can I change the display language?

Yes. Select “Language” in the menu to choose your display language.

Watch the video:

Chapter 6: Troubleshooting FAQ

1. Why does my Refillution not switch on?

Check that the power cable is plugged into both the machine and the wall socket. Turn the rear main switch on and make sure the rotary wheel is in the OFF position. If the display remains dark, contact ADA Cosmetics Customer Service. Do not open the housing.

2. Why has the display switched off?

After two minutes without activity, Refillution enters standby mode. Press any button to wake it up. If the display does not respond, check the power connection.

3. Why does Refillution say the door is open?

Push the SmartCube drawer all the way in until it clicks into place. Then close the front door. The door indicator light should go out. If it stays on, contact Customer Service.

4. Why will Refillution not scan my SmartCube?

Find the Data Matrix Code (DMC) on the SmartCube. It is a small square code, not a QR code. Hold it in front of the machine scanner and try again once. If the code is missing, damaged or still not recognised, contact Customer Service rather than bypassing the scan.

5. How do I know whether my SmartCube is correctly connected?

Check that the adapter is screwed onto the SmartCube and the connecting coupling makes an audible click when attached. Position the SmartCube according to the drawer markings, push the drawer fully in and close the door. Do not force the connector.

6. What should I do when the screen shows Venting?

Place a suitable container under the outlet. Turn the rotary wheel clockwise to vent the hose. As soon as cosmetic liquid emerges, press the fast-forward button to confirm and return the wheel to OFF. Do not fill a dispenser during venting.

7. Why is no liquid coming out during venting?

Stop the pump. Check that the SmartCube is not empty, that the coupling has clicked into place and that the door is closed. Retry venting once into a separate container. If no liquid comes out, contact Customer Service.

8. When do I have to replace the SmartCube?

The display shows an approximate remaining liquid level. If the SmartCube is empty or the maximum dispensable volume is reached, replace it according to the instructions. Never operate the pump with an empty SmartCube.

9. Why does the machine show a red light after scanning the dispenser?

The cosmetic product in the dispenser label does not match the product in the SmartCube. Compare the product name, type and brand on both labels and use the correct combination. Never bypass the mismatch warning.

10. Why is my dispenser code not recognised?

Check that the SmartCube has been scanned and vented. Then scan the Data Matrix Code on the back of the dispenser. If the label is missing or unreadable or the scan still fails, contact Customer Service.

11. What does Dispenser Usage Limit Reached mean?

This dispenser has reached its configured maximum total refill volume. Do not refill it further. Use another approved dispenser and inform your supervisor if a replacement is needed.

12. Why does the pump not start after scanning?

Make sure the door is closed, the SmartCube is vented and the dispenser scan was accepted. Check that the rotary wheel is initially in the OFF position, then turn it gently clockwise. If a warning remains or nothing happens, contact Customer Service.

13. Why does the Fast Filling button not work?

Fast Filling is switched off in the factory settings. Normal filling with the rotary wheel is still available. An authorised user can activate Fast Filling in the service menu if required.

14. Why does the machine stop dispensing automatically?

When Auto Stop is enabled, the pump stops after the selected volume during fast-forward-button filling. It also stops when the button or foot pedal is released. If it stops unexpectedly outside these conditions, contact Customer Service.

15. What should I do if the bottle is getting too full?

Stop dispensing immediately: turn the wheel back to OFF until it clicks, or release the fast-forward button or pedal. Always watch the fill level using the light behind the outlet. Do not turn the wheel past its stop.

16. What should I do if I may have filled the wrong product?

Stop and separate the affected dispenser. Do not return it to a guest bathroom and do not mix or top up products. Contact your supervisor or ADA Cosmetics Customer Service for the correct next step.

17. Do I need to clean the machine when changing cosmetic products?

Changing the product type or brand generally requires the integrated hose-cleaning cycle with Refillution Cleanser. Only if the machine explicitly offers Skip Cleaning for an approved compatible change may that option be considered. After cleaning, vent the new product into a container until only cosmetic liquid comes out.

18. What should I do if the cleaning cycle is interrupted?

Do not refill guest dispensers until the cleaning process is safely completed. Follow the displayed cleaning procedure and vent the new cosmetic product into a collection container. If you cannot confirm that no cleaning fluid remains, contact Customer Service.

19. What does the maintenance light mean?

The hose system may need replacement. Tell your trained supervisor and arrange an approved hose change. If the light is red and the machine blocks dispensing, stop using it until the full hose system has been replaced.

20. Why does Refillution reject the replacement hose code?

A replacement hose Data Matrix Code can only be registered once. Check that you have a new, unused approved hose kit and contact the trained supervisor or Customer Service. Do not reuse an old hose system.

21. What should I do if I see a red error, smoke or a damaged cable?

Stop refilling immediately. For smoke, a damaged power cable or liquid inside the housing, switch off and disconnect power if safe; do not restart. Contact ADA Cosmetics Customer Service. For red blocking errors, also stop operation and request technical support.

WE TRANSCEND BORDERS

OUR GLOBAL PRESENCE

Present in more than 50 countries and five continents, we offer worldwide distribution with short delivery routes, thanks to local warehousing and global logistics networks. Our expert customer service consultants around the world provide professional advice, out-of-the-box thinking, and workflow management tools to ensure a smooth and successful partnership from day one.

CONTACT
SHOP NOW

Buy ADA Cosmetics products in our online shop.

REQUEST AN OFFER

For product inquiries worldwide, please contact our sales partners.

CONTACT

For contact inquiries of all kinds, please use our contact form. We will get in touch with you as soon as possible.